Setup guide

Building configuration...

Current configuration:

...

interface Ethernet0

description connected to EthernetLAN

ip address 10.1.1.12 255.255.255.0

interface Serial0

description connected to Wandy

ip address 1.1.1.2 255.255.255.252

serial restart-delay 1

ip classless

ip route 0.0.0.0 0.0.0.0 10.1.1.254

...

end

CISCO#

Send ping packets to the Wandy router:

CISCO#ping 1.1.1.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 28/32/40 ms

CISCO#

Note! Keep in mind that for the point-to-point link the network mask is set to 32 bits, the argument

network is set to the IP address of the other end, and the broadcast address is set to

255.255.255.255.

Cyclades PC300 PCI Adapters

Document revision 1.1 (Fri Mar 05 08:13:30 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents

General Information

Summary

Specifications