Setup guide

Description
RSV/V.35 Synchronous Link Applications
Example
General Information
Summary
The Wandy RouterOS supports the following Cyclades PC300 Adapter hardware:
• RSV/V.35 (RSV models) with 1 or 2 RS-232/V.35 interfaces on standard DB25/M.34
connector, 5Mbps, internal or external clock
• T1/E1 (TE models) with 1 or 2 T1/E1/G.703 interfaces on standard RJ48C connector,
Full/Fractional, internal or external clock
• X.21 (X21 models) with 1 or 2 X.21 on standard DB-15 connector, 8Mbps, internal or external
clock
Specifications
Packages required: synchronous
License required: level4
interface cyclades
Standards and Technologies: X.21, X.35, T1/E1/G.703, Frame Relay, PPP, Cisco-HDLC
Hardware usage: Not significant
Related Documents
• Package Management
• Device Driver List
• IP Addresses and ARP
• Log Management
Additional Documents
• http://www.cyclades.com/products/svrbas/pc300.php - the product on-line documentation
• http://mt.lv/Documentation/pc300_21_el.pdf - the Installation Manual in .pdf format
Synchronous Interface Configuration
interface cyclades
Description
You can install up to four Cyclades PC300 PCI Adapters in one PC box, if you have so many
adapter slots and IRQs available.
The Cyclades PC300/RSV Synchronous PCI Adapter comes with a V.35 cable. This cable should
work for all standard modems, which have V.35 connections. For synchronous modems, which
have a DB-25 connection, you should use a standard DB-25 cable.