Setup guide

/interface pppoe-server server add service-name=internet interface=wlan1 \
\... default-profile=pppoe-profile
• To configure Wandy RouterOS to be a PPPoE client
1. Just add a pppoe-client:
/interface pppoe-client add name=pppoe-user-mike user=mike password=123 interface=wlan1
\
\... service-name=internet disabled=no
Specifications
Packages required: ppp
License required: level1 (limited to 1 interface), level3 (limited to 200 interfaces), level4 (limited to
200 interfaces), level5 (limited to 500 interfaces), level6 (unlimited)
interface pppoe-server, /interface pppoe-client
Standards and Technologies: PPPoE (RFC 2516)
Hardware usage: PPPoE server may require additional RAM (uses approx. 200KB for each
connection) and CPU power. Supports maximum of 10000 connections
Related Documents
• Package Management
• IP Addresses and ARP
• Log Management
Additional Documents
Links for PPPoE documentation:
• http://www.ietf.org/rfc/rfc2516.txt
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120dc/120dc3/p
ppoe.• http://www.carricksolutions.com
PPPoE Clients:
• RASPPPoE for Windows 95, 98, 98SE, ME, NT4, 2000, XP, .NET
http://user.cs.tu-berlin.de/~normanb
PPPoE Client Setup
interface pppoe-client
Description
The PPPoE client supports high-speed connections. It is fully compatible with the Wandy PPPoE
server (access concentrator).
Note for Windows. Some connection instructions may use the form where the "phone number" us
"Wandy_AC\mt1" to indicate that "Wandy_AC" is the access concentrator name and "mt1" is
the service name.
Property Description
name (name; default: pppoe-out1) - name of the PPPoE interface