Setup guide

• Log Management
• AAA
Additional Documents
• http://www.ietf.org/rfc/rfc2138.txt?number=2138
• http://www.ietf.org/rfc/rfc2138.txt?number=2139
Serial Port Configuration
port
Property Description
name (name; default: serialN) - port name
used-by (read-only: text) - shows the user of the port. Only free ports can be used in PPP setup
baud-rate (integer; default: 9600) - maximal data rate of the port
data-bits (7 | 8; default: 8) - number of bits per character transmitted
parity (none | even | odd; default: none) - character parity check method
stop-bits (1 | 2; default: 1) - number of stop bits after each character transmitted
flow-control (none | hardware | xon-xoff; default: hardware) - flow control method
Notes
Keep in mind that baud-rate, data-bits, parity, stop-bits and flow control parameters must be the
same for both communicating sides.
Example
[admin@Wandy] > /port print
# NAME USED-BY BAUD-RATE
0 serial0 Serial Console 9600
1 databooster1 9600
2 databooster2 9600
3 databooster3 9600
4 databooster4 9600
5 databooster5 9600
6 databooster6 9600
7 databooster7 9600
8 databooster8 9600
9 cycladesA1 9600
10 cycladesA2 9600
11 cycladesA3 9600
12 cycladesA4 9600
13 cycladesA5 9600
14 cycladesA6 9600
15 cycladesA7 9600
16 cycladesA8 9600
[admin@Wandy] > set 9 baud-rate=38400
[admin@Wandy] >
PPP Server Setup