Setup guide

Adding Software Packages

Description

The basic installation comes only with the system package. This includes basic IP routing and

router administration. To have additional features such as IP Telephony, OSPF, wireless and so on,

you will need to download additional software packages.

The additional software packages should have the same version as the system package. If not, the

package won't be installed. Please consult the Wandy RouterOS Software Package Installation

and Upgrading Manual for more detailed information about installing additional software packages.

To upgrade the router packages, simply upload the packages to the router via ftp, using the binary

transfer mode. After you have uploaded the packages, reboot the router, and the features that are

provided by those packages will be available (regarding your license type, of course).

Navigating The Terminal Console

Description

Welcome Screen and Command Prompt

After logging into the router you will be presented with the Wandy RouterOS Welcome Screen

and command prompt, for example:

MMM MMM KKK TTTTTTTTTTT KKK

MMMM MMMM KKK TTTTTTTTTTT KKK

MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK

MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK

MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK

MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK

Terminal xterm detected, using multiline input mode

[admin@Wandy] >

The command prompt shows the identity name of the router and the current menu level, for

example:

[admin@Wandy] > Base menu level

[admin@Wandy] interface> Interface management

[admin@Wandy] ip address> IP address manangement

Commands

The list of available commands at any menu level can be obtained by entering the question mark '?',

for example:

[admin@Wandy] >

certificate Certificate management

driver Driver manageent

file Local router file storage.

import Run exported configuration script

interface Interface configuration

log System logs

password Change password

ping Send ICMP Echo packets

port Serial ports

quit Quit console