Setup guide

Notes
Depending on current settings and answers to the previous questions, default values of following
questions may be different. Some questions may disappear if they become redundant (for example,
there is no use of asking for 'relay' when the server will lend the directly connected network)
Example
To configure DHCP server on ether1 interface to lend addresses from 10.0.0.2 to 10.0.0.254 which
belong to the 10.0.0.0/24 network with 10.0.0.1 gateway and 159.148.60.2 DNS server for the time
of 3 days:
[admin@Wandy] ip dhcp-server> setup
Select interface to run DHCP server on
dhcp server interface: ether1
Select network for DHCP addresses
dhcp address space: 10.0.0.0/24
Select gateway for given network
gateway for dhcp network: 10.0.0.1
Select pool of ip addresses given out by DHCP server
addresses to give out: 10.0.0.2-10.0.0.254
Select DNS servers
dns servers: 159.148.60.2
Select lease time
lease time: 3d
[admin@Wandy] ip dhcp-server>
The wizard has made the following configuration based on the answers above:
[admin@Wandy] ip dhcp-server> print
Flags: X - disabled, I - invalid
# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP
0 dhcp1 ether1 0.0.0.0 dhcp_pool1 3d no
[admin@Wandy] ip dhcp-server> network print
# ADDRESS GATEWAY DNS-SERVER WINS-SERVER DOMAIN
0 10.0.0.0/24 10.0.0.1 159.148.60.2
[admin@Wandy] ip dhcp-server> /ip pool print
# NAME RANGES
0 dhcp_pool1 10.0.0.2-10.0.0.254
[admin@Wandy] ip dhcp-server>
Universal Client Interface
Document revision 2.2 (Fri Mar 05 08:39:12 GMT 2004)
This document applies to Wandy RouterOS V2.8
Table of Contents
Table of Contents
Summary
Specifications