Setup guide

Service Port

ip hotspot universal service-port

Description

Just like for classic NAT, the Universal Client Interface 'breaks' some protocols that are

incompatible with address translation. To leave these protocols consistent, helper modules must be

used. For the Universal Client Interface the only such a module is for FTP protocol.

Property Description

name (read-only: name) - protocol name

ports (read-only: integer) - list of the ports on which the protocol is working

Example

To set the FTP protocol uses bot 20 and 21 TCP port:

[admin@Wandy] ip hotspot universal service-port> print

Flags: X - disabled

# NAME PORTS

0 ftp 21

[admin@Wandy] ip hotspot universal service-port> set ftp ports=20,21

[admin@Wandy] ip hotspot universal service-port> print

Flags: X - disabled

# NAME PORTS

0 ftp 20

[admin@Wandy] ip hotspot universal service-port>

IP Telephony

Document revision 2.2 (Mon Apr 26 12:53:19 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents

Summary

Specifications