Setup guide

Description

This submenu is used for managing all IP telephony voice ports (linejack, phonejack, isdn, voip,

voicetronix, zaptel)

Property Description

name (name) - assigned name of the voice port

zaptel) - type of the installed telephony voice port:

• phonejack - Quicknet PhoneJACK (ISA)

• linejack - Quicknet LineJACK (ISA)

• phonejack-lite - Quicknet PhoneJACK Lite Linux Edition (ISA)

• phonejack-pci - Quicknet PhoneJACK (PCI)

• voip - generic Voice over IP port

• isdn - ISDN cards

• voicetronix - Voicetronix OpenLine4

• zaptel - Zaptel Wildcard X100P

autodial (integer; default: "") - number to be dialed automatically, if call is coming in from this

voice port

Notes

If autodial does not exactly match an item in /ip telephony numbers, there can be two

possibilities:

• if autodial is incomplete, rest of the number is asked (local voice port) or incoming call is

denied (VoIP)

• if autodial is invalid, line is hung up (PSTN line), busy tone is played (POTS) or incoming

call is denied (VoIP)

Voicetronix Voice Ports

ip telephony voice-port voicetronix

Property Description

name (name) - name given by the user or the default one

autodial (integer; default: "") - phone number which will be dialed immediately after the handset

has been lifted. If this number is incomplete, then the remaining part has to be dialed on the

dial-pad. If the number is incorrect, the line is hung up. If the number is correct, then the

appropriate number is dialed (the direct-call mode is used - the line is picked up only after the

remote party answers the call)

playback-volume (integer: -48..48; default: 0) - playback volume in dB

• 0 - 0dB meand no change to signal level

record-volume (integer: -48..48; default: 0) - record volume in dB

• 0 - 0dB meand no change to signal level

region (name; default: us) - regional setting for the voice port. This setting is used for setting the