Setup guide

dr-id (read-only: IP address) - designated router's router id for this neighbor

backup-dr-id (read-only: IP address) - backup designated router's router id for this neighbor

Notes

The neighbour's list also displays the router itself

Example

The following text can be observed just after adding an OSPF network:

admin@Wandy] routing ospf> neighbor print

router-id=10.0.0.204 address=10.0.0.204 priority=1 state="2-Way"

state-changes=0 ls-retransmits=0 ls-requests=0 db-summaries=0

dr-id=0.0.0.0 backup-dr-id=0.0.0.0

[admin@Wandy] routing ospf>

RIP

Document revision 1 (Wed Mar 24 12:32:12 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents

General Information

Summary

Specifications