Setup guide

card with monitor
• Serial console - First RS232 asynchronous serial port (usually, onboard port marked as
COM1), which is by default set to 9600bit/s, 8 data bits, 1 stop bit, no parity
When router is not configured, there are only two ways to configure it:
• Local teminal console - AT, PS/2 or USB keyboard and VGA-compatible video controller card
with monitor
• Serial console - any (you may choose any one; the first, also known as COM1, is used by
default) RS232 asynchronous serial port, which is by default set to 9600bit/s, 8 data bits, 1 stop
bit, no parity
• Telnet - telnet server is running on 23 TCP port by default
• SSH - SSH (secure shell) server is running on 22 TCP port by default (available only if security
package is installed)
• MAC Telnet - Wandy MAC Telnet potocol server is by default enabled on all Ethernet-like
interfaces
• Winbox - Winbox is a RouterOS remote administration GUI for Windows, that use 3986 TCP
port (or 3987 if security package is installed)
After the router is configured, it may be managed through the following interfaces:
Device Driver List
Document revision 2.4 (Tue Apr 06 17:26:13 GMT 2004)
This document applies to Wandy RouterOS V2.8
Table of Contents
Table of Contents
Summary
Ethernet
Specifications
Description
Notes
Wireless
Specifications
Description
Aironet Arlan
Specifications
Description
RadioLAN
Specifications
Description