Setup guide

Notes
Example
Removing Device Drivers
Description
Notes on PCMCIA Adapters
Description
Notes
General Information
Summary
Device drivers represent the software interface part of installed network devices. Some drivers are
included in the system software package and some in additional feature packages.
For complete list of supported devices and respective device driver names please consult the
'Related Documents' section.
The device drivers for PCI, miniPCI, PC (PCMCIA) and CardBus cards are loaded automatically.
Other network interface cards (most ISA and PCI ISDN cards) require the device drivers to be
loaded manually using the /driver add command.
Users cannot add their own device drivers, only drivers included in the Wandy RouterOS software
packages can be used. If you need a support for a device, which hasn't a driver yet, you are
welcome to suggest it at suggestion on our web site.
driver
Standards and Technologies: PCI, ISA, PCMCIA, miniPCI, CardBus
Hardware usage: Not significant
Related Documents
• Package Management
• License Management
•
Device Driver List
Loading Device Drivers
driver
Description
In order to use network interface card which has a driver that is not loaded automatically, exempli
gratia NE2000 compatible ISA card, you need to add driver manually. This is accomplished by
issuing add command under the driver submenu level.
To see system resources occupied by the installed devices, use the /system resource io print and
/system resource irq print commands.
Property Description