Setup guide

Related Documents
• Wireless Client and Wireless Access Point Manual
• Bridge Interfaces
• ARLAN 655 Wireless Client Card
• CISCO/Aironet 2.4GHz 11Mbps Wireless Interface
• Cyclades PC300 PCI Adapters
• Ethernet Interfaces
• EoIP Tunnel Interface
• FarSync X.21 Interface
• FrameRelay (PVC, Private Virtual Circuit) Interface
• IPIP Tunnel Interfaces
• ISDN (Integrated Services Digital Network) Interface
• L2TP Interface
• MOXA C101 Synchronous Interface
• MOXA C502 Dual-port Synchronous Interface
• PPP and Asynchronous Interfaces
• PPPoE Interface
• PPTP Interface
• RadioLAN 5.8GHz Wireless Interface
• VLAN Interface
• Xpeed SDSL Interface
Description
The Manual describes general settings of Wandy RouterOS interfaces.
Interface Status
interface
Property Description
name (text) - the name of the interface
status - shows the interface status
type (read-only: arlan | bridge | cyclades | eoip | ethernet | farsync | ipip | isdn-client | isdn-server |
l2tp-client | l2tp-server | moxa-c101 | moxa-c502 | mtsync | pc | ppp-client | ppp-server | pppoe-client
| pppoe-server | pptp-client | pptp-server | pvc | radiolan | sbe | vlan | wavelan | wireless | xpeed) -
interface type
mtu (integer) - maximum transmission unit for the interface (in bytes)
rx-rate (integer; default: 0) - maximum data rate for receiving data
• 0 - no limits
tx-rate (integer; default: 0) - maximum data rate for transmitting data
• 0 - no limits
Example
To see the list of all available interfaces:
[admin@Wandy] interface> print