Setup guide

Flags: X - disabled, D - dynamic, R - running

# NAME TYPE RX-RATE TX-RATE MTU

0 R ether1 ether 0 0 1500

1 R bridge1 bridge 0 0 1500

2 R ether2 ether 0 0 1500

3 R wlan1 wlan 0 0 1500

[admin@Wandy] interface>

Traffic Monitoring

Command name: /interface monitor-traffic

Description

The traffic passing through any interface can be monitored.

Notes

One or more interfaces can be monitored at the same time.

Example

Multiple interface monitoring:

[admin@Wandy] interface> monitor-traffic ether1,wlan1

received-packets-per-second: 1 0

received-bits-per-second: 475bps 0bps

sent-packets-per-second: 1 1

sent-bits-per-second: 2.43kbps 198bps

-- [Q quit|D dump|C-z pause]

FarSync X.21 Interface

Document revision 1.1 (Fri Mar 05 08:14:24 GMT 2004)

This document applies to Wandy RouterOS V2.8

Table of Contents

General Information

Summary

Specifications