Setup guide

Synchronous Interface Configuration
Description
Property Description
Notes
Example
Troubleshooting
Description
Synchronous Link Application Examples
Wandy Router to Wandy Router
Wandy Router to Cisco Router
General Information
Summary
The Wandy RouterOS supports the MOXA C502 PCI Dual-port Synchronous 8Mb/s Adapter
hardware. The V.35 synchronous interface is the standard for VSAT and other satellite modems.
However, you must check with the satellite system supplier for the modem interface type.
Specifications
Packages required: synchronous
License required: level4
interface moxa-c502
Standards and Technologies: Cisco/HDLC-X.25 (RFC 1356), Frame Relay (RFC1490), PPP
(RFC-1661), PPP (RFC-1662)
Hardware usage: Not significant
Related Documents
• Package Management
• Device Driver List
•
IP Addresses and ARP
• Log Management
Description
You can install up to four MOXA C502 synchronous cards in one PC box, if you have so many PCI
slots available. Assuming you have all necessary packages and licences installed, in most cases it
should to be done nothing at that point (all drivers are loaded automatically).
Additional Documents
For more information about the MOXA C502 Dual-port Synchronous 8Mb/s Adapter hardware
please see:
• http://www.moxa.com/product/sync/C502.htm - the product on-line documentation
• C502 Dual Port Sync Board User's Manuall the user's manual in PDF format