Setup guide

successfully-sent: 1
max-retries: 0
average-retries: 0
min-retries: 0
sent: 11
successfully-sent: 11
max-retries: 0
average-retries: 0
min-retries: 0
sent: 21
successfully-sent: 21
max-retries: 0
average-retries: 0
min-retries: 0
sent: 31
successfully-sent: 31
max-retries: 0
average-retries: 0
min-retries: 0
sent: 41
successfully-sent: 41
max-retries: 0
average-retries: 0
min-retries: 0
sent: 50
successfully-sent: 50
max-retries: 0
average-retries: 0
min-retries: 0
[admin@Wandy] interface radiolan>
Troubleshooting
Description
• The radiolan interface does not show up under the interfaces list
Obtain the required license for RadioLAN 5.8GHz wireless feature
• The wireless card does not obtain the MAC address of the default destination
Check the cabling and antenna alignment
Wireless Network Applications
Point-to-Point Setup with Routing
Let us consider the following network setup:
The minimum configuration required for the RadioLAN interfaces of both routers is:
1. Setting the Service Set Identifier (up to alphanumeric characters). In our case we use SSID
"ba72"
2. Setting the distance parameter, in our case we have 6km link.
The IP addresses assigned to the wireless interface of Router#1 should be from the network
10.1.0.0/30, e.g.:
[admin@Wandy] ip address> add address=10.1.0.1/30 interface=radiolan1