User's Manual Part 1

Table Of Contents

Using the Configuration Menu (continued)

Home > Wireless

Apply- Click Apply to save the changes.

Radio

Frequency-

The radio frequency will remain at 2.437GHz* .

Channel- 6 is the default channel. All wireless devices on the network must share

the same channel*.

SSID

Broadcast- Enable or Disable SSID Broadcast. Enabling this feature broadcasts the

SSID across the network.

SSID- Service Set Identifier (SSID) is the name designated for a specific wire-

less local area network (WLAN). The SSID’s factory default setting is

default. The SSID can be easily changed to connect to an existing

wireless network or to establish a new wireless network.

Wireless

Band-

Select 802.11g or 802.11a from the pulldown menu.

Note: In the Configuration screens that follow, you will be able to

configure settings for 802.11a and 802.11g devices in your network.

Settings that you input for 802.11g devices will also apply to

802.11b devices in your network.

* default settings vary for 802.11a

Due to DFS(Dynamic Frequency Selection),802.11a SSID Broadcast is always enabled.(EEC countries)