User's Manual Part 1

Using the Configuration Menu (continued)
Advanced > Mode
Choose 802.11a or
802.11g wireless
band; then select
from the following
options*:
Access Point:
Select this mode to
create a WLAN
(wireless local area
network).
PtP Bridge (Point
to Point Bridge):
This mode enables
you to connect two
WLANS.
Remote AP M AC
Address: Input the
remote AP M AC
address of the AP
with which the
DWL-7200AP will
Associate.
PtMP Bridge (Point to Multi-Point Bridge): This mode enables you to connect multiple
WLANs
Remote AP MAC Address: Input the remote AP MAC Address of the APs with which
the DWL-7200AP will associate
AP Repeater: To extend the ange of the wireless network select this option and enter
the MAC address ofthe remote AP within your network that will have its range extended.
Remote AP MAC Address: Enter the MAC address of the remote AP within your network
AP Clinet: To transform any IEEE 802.3 Ethernet device (e.g., A computer, print, etc.)
Into an 802.11b wireless client when it communicates with another DWL-7200AP that is
acting as an AP.
Remote AP MA C Address: Enter the MAC address of the remote AP within your network
Apply: Click Apply if you have made any changes.
13
* WDS (Wireless Distribution System) features for PtP/PtMP Bridging and Repeating are only available in 2.4GHz. (EEC countries)