TM D-Link AirPlus G DWL-G120 802.11g (2.
Contents Package Contents ................................................................................3 Introduction............................................................................................4 Wireless Basics ....................................................................................6 Getting Started ....................................................................................10 Using the Configuration Utility .............................................................
Package Contents Contents of Package: D-Link AirPlus G DWL-G120 TM 802.11g (2.4 GHz) Wireless USB Adapter Manual on CD-ROM Quick Installation Guide USB Cable If any of the above items are missing, please contact your reseller.
Introduction The D-Link AirPlusTM G DWL-G120 802.11g (2.4GHz) Wireless USB Adapter is a convenient Plug & Play USB 2.0 solution that brings wireless networking to your laptop or desktop PC. It provides up to a 128-bit level of WEP security to your wireless data transfers. Unlike most network cards, the DWL-G120 provides data transfers at up to 54 Mbps when used with other D-Link AirPlus G products. The 802.11g standard is backwards compatible with 802.11b products.
Features and Benefits Five times faster - achieve data transfer speeds up to 54 Mbps; up to 5x faster than conventional 802.11b networks, when used with other 802.11g devices. Convenience of Plug & Play installation. Fully 802.11g compatible. Backwards compatible with 802.11b devices. USB 2.0 standard. Network Security with 128-bit WEP encryption. Supports Infrastructure networks via an access point or router and Peer-to-Peer communication in Ad-Hoc mode.
Features Link/Activity LED Power - Indicates that the DWL-G120 is properly installed in the computer. Antenna Used to wirelessly connect to 802.11g networks Link - Blinks when data is being transmitted through the wireless connection. Mini-USB 2.0 port Used to connect the DWL-G120 to your computer Wireless Basics D-Link wireless products are based on industry standards to provide easy-touse and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
Wireless Basics (continued) People use wireless LAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs – WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation.
Wireless Basics (continued) Standards-Based Technology The DWL-G120 Wireless USB Adapter utilizes the 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54 Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays.
Wireless Basics (continued) Installation Considerations TM The D-Link AirPlus G DWL-G120 lets you access your network using a wireless connection from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Getting Started With its default settings, the DWL-G120 will connect with other D-Link AirPlusTM G products, right out of the box. There are basically two modes of networking: Infrastructure – using an access point or router, such as the DI-624. Ad-Hoc – directly connecting to another computer, for Peer-to-Peer communication, using wireless network adapters on each computer, such as two or more DWL-G120 Wireless USB Adapters.
Getting Started (continued) Setting up a Wireless Infrastructure Network 1 2 3 DI-624 802.11g/2.4GHz Wireless 108Mbps USB Adapter 6 4 DWL-G120 5 802.11g/2.4GHz Wireless USB Adapter DWL-G120 802.11g/2.4GHz Wireless USB Adapter For a typical wireless setup at home (as shown above), please do the following: You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office). Consult with your Cable or DSL provider for proper installation of the modem.
Getting Started (continued) Setting up a Wireless Ad-Hoc Network D-Link AirPlusTM G DWL-G120 802.11g/2.4GHz Wireless USB Adaper Install the DWL-G120 Wireless USB adapter into the desktop computer. (See the Quick Installation Guide included with the product for installation instructions.) Install another DWL-G120 into the laptop computer. Or you may install another wireless adapter such as the D-Link DWL-G650 wireless PC Card adapter.
Using the Configuration Utility TM D-Link AirPlus G DWL-G120 uses the Configuration Utility as the management software. The utility provides the user an easy interface to change any settings related to the wireless adapter. After you have completed the installation of the DWL-G120 (refer to the Quick Installation Guide that came with your purchase) whenever you start the computer, the Configuration Utility starts automatically and the system tray icon is loaded in the toolbar (see illustration below*.
Using the Configuration Utility (continued) After clicking on the Configuration Utility icon, the Link Info screen will display the settings for the DWL-G120: Link Info Status: Displays current connection state of the DWLG120. D-Link AirPlus G Wireless Utility 54 SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default. Tx Rate: Tx Rate settings are automatically determined for an optimal speed up to a maximum of 54Mbps.
Using the Configuration Utility (continued) Configuration SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on the existing wireless router or access point. D-Link AirPlus G Wireless Utility 54 Auto Wireless Mode: Infrastructure is the factory default setting. Ad-Hoc mode is used for Peer-to-Peer networking. See the Getting Started section in this manual for examples of these network types.
Using the Configuration Utility (continued) Encryption D-Link AirPlus G Wireless Utility Data Encryption: Enable encryption by clicking in the box. Data encryption is de-selected as the default setting.
Using the Configuration Utility (continued) Site Survey D-Link AirPlus G Wireless Utility Available Networks: The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profiles: In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public places.
Using the Configuration Utility (continued) Properties In this window you can configure all the properties of a profile in order to connect with a network of your choice. Click OK to save the changes.
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, Me or 98SE. Go to Start>Control Panel>Network Connections Select Set up a home or small office network When this screen appears, click Next.
Networking Basics (continued) Please follow all the instructions in this window: Click Next. In the following window, select the best description of your computer. If your computer connects to the Internet through a router, select the second option as shown. Click Next.
Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next.
Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Networking Basics (continued) In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Networking Basics (continued) Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
Networking Basics (continued) Naming your Computer To name your computer in Windows XP, please follow these directions: Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name tab in the System Properties window. You may enter a Computer Description if you wish; this field is optional. To rename the computer and join a domain, click Change.
Networking Basics (continued) Naming your Computer In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK.. Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP address range (see Getting Started in this manual for a definition of IP address range.
Networking Basics (continued) Checking the IP Address in Windows XP This window will appear. Click the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses.
Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 29
Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP) Click Properties In the screen below, please do the following: Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4.
Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP/2000* Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. Checking the Wireless Connection by Pinging in Windows Me/98* Go to Start > Run > type command. A window similar to this will appear.
Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-G120. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have another operating system, these solutions will still apply although the appearance on your computer screen may differ.) 1. Check that the drivers for the DWL-G120 are installed properly.
Troubleshooting (continued) Double-click on Network Adapters Right-click on D-Link AirPlus G DWL-G120 Wireless USB Adapter D-Link AirPlus G DWL-G120 Wireless USB Adapter Select Properties to check that the drivers are installed properly D-Link AirPlus G DWL-G120 Wireless USB Adapter D-Link AirPlus G DWL-G120 Wireless USB Adapter Look under Device Status to check that the device is working properly Click OK 33
Troubleshooting (continued) 2. What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 3.
Technical Specifications Standard IEEE 802.11g IEEE 802.11b IEEE 802.11 Diagnostic LED Power Link Status Temperature Operating: 0ºC to 55ºC (32ºF to 131ºF) Storing: -20ºC to 75ºC (-4ºF to 167ºF) Humidity: 95%, non-condensing Antenna Type: Single External, Dual Diversity Modulation Technique: DSSS Physical Dimensions: L = 3 inches W = 2 inches H = 0.5 inches Data Rates: 54, 22, 11, 5.5, 2, 1 Mbps (with Automatic Fallback) Interface: USB 2.
Techni cal Support echnical You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week.
Warranty and Registration (USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • • D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
