User Manual

14
SSID: (Service Set
Identifier) Default is the
default setting. The SSID is
a unique name that
identifies a network. All
devices on a network must
share the same SSID
name in order to
communicate on the
network. If you choose to
change the SSID from the
default setting, input your
new SSID name in this
field.
Channel: Channel 6 is the
default channel. Input a new
number if you want to change
the default setting. All
devices on the network must be set to the same channel to communicate on the network.
Authentication:
When WPA is selected fill in the following fields:
RADIUS Server 1 IP:
Enter the IP address of the RADIUS server.
Port: Enter the Port number here.
Shared Secret: Enter the shared secret here.
Apply: Click Apply to apply the changes.
Using the Configuration Utility in AP Mode (continued)
Home > Wireless > WPA
Select WPA to select Wi-Fi Protected Access in conjunction with a
RADIUS server in your network.
RADIUS Server 2 IP: Enter the IP address of the RADIUS server.
Port: Enter the Port number here.
Shared Secret: Enter the shared secret here.