User Manual

35
Using the Configuration Utility
in Router Mode

Home > Wizard
The Home>Wizard
screen will appear.
Please refer to the
Quick Installation
Guide for more
information
regarding the
Setup Wizard.
Note: if you have changed the default IP address assigned
to the DWL-G730AP, make sure to enter the correct IP
address.


Open the Web browser
Type in the IP address of the router
(http://192.168.0.30)


Type admin in the User Name field
Leave the Password blank
Click OK
To configure the DWL-G730AP in Router mode, you must be connected to the router
via a wireless network adapter. The LAN Port on the unit functions as a WAN port
when the DWL-G730AP is operating in Router mode. To run the setup wizard, establish
a wireless connection with the DWL-G730AP and follow the steps below.
To use the DWL-G730AP as a router, toggle the switch on the back of the unit.
)