User Manual

Using the Configuration Utility in Router Mode (continued)

Home > Wireless

Keys 1-4-

Input up to 4 WEP keys; select the one you wish to use.

Key Type-

Select HEX or ASCII.

WEP Encryption-

Select the level of encryption desired: 64-bit, or 128-bit.

SSID-

Service Set Identifier

(SSID) is the name

designated for a

specific wireless local

area network (WLAN).

The SSID’s factory

default setting is

default. The SSID can

be easily changed to

connect to an existing

wireless network or to

establish a new

wireless network.

WEP-

Wired Equivalent Privacy (WEP) is a wireless security protocol

for Wireless Local Area Networks (WLAN). WEP provides

security by encrypting the data that is sent over the WLAN.

Select Enabled or Disabled. Disabled is the default setting.

Channel-

6 is the default channel. All devices on the network must share

the same channel.

Select Open System to communicate the key across the

network.

Select Shared Key to limit communication only to those devices

that share the same WEP settings.

Select WPA-PSK to select Wi-Fi Protected Access without a

RADIUS server.

Authentication-