User's Manual

51
D-Link DGL-5500 User Manual
Section 3 - Conguration
Use this option to save the current router conguration settings to
a le on the hard disk of the computer you are using. First, click the
Save Conguration button. A le dialog will appear, allowing you
to select a location and le name for the settings.
Use this option to load previously saved router conguration
settings. First, use the Choose File option to nd a previously saved
le of conguration settings. Then, click the Restore Conguration
from File button to transfer those settings to the router.
This option will restore all configuration settings back to the
settings that were in eect at the time the router was shipped
from the factory. Any settings that have not been saved will be lost,
including any rules that you have created. If you want to save the
current router conguration settings, use the Save Conguration
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
System
This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
Browse:
Upload:
After you have downloaded the new rmware, click
Browse to locate the rmware update on your hard
drive. Click Upload to complete the rmware upgrade.
Once you have a rmware update on your computer,
use this option to browse for the le and then upload
the information into the access point.