USER MANUAL Home Monitoring Starter Kit DHM-901T VERSION 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.0 November 15, 2010 DHM-901T Revision A1 with firmware version 1.00 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Product Overview......................................................... 4 Package Contents.................................................... 4 System Requirements.............................................. 5 Features................................................................... 6 Hardware Overview: Gateway (Front)...................... 7 Hardware Overview: Gateway (Back)...................... 8 Hardware Overview: Keypad....................................
Product Overview Package Contents DHM-401T Gateway DHM-301T Keypad DHM-303T Contact Sensor DHM-304T Motion Sensor Stand for DHM-401T Power adapter for DHM-401T Bracket for DHM-304T Batteries for DHM-301T/303T/304T Mounting kits for DHM-301T/303T/304T Ethernet cable Quick Installation Guide If any of the above items are missing, please contact your reseller.
Product Overview System Requirements A computer with Windows XP SP2/Vista/7 or higher for configuration D-Link DHM-901T User Manual 5
Product Overview Features Contact Sensor The DHM-303T Contact Sensor can be used to detect whether a door or window is open or closed. You can use this to provide security for windows, or to monitor entry and exit through a doorway, and can be used in tandem with other sensors and keypads to monitor and control access to an area. Motion Sensor The DHM-304T Motion Sensor can be used to detect motion in an area.
Product Overview Hardware Overview: Gateway (Front) LEDs - Status - Alarm - Online - Event D-Link DHM-901T User Manual 7
Product Overview Hardware Overview: Gateway (Back) LAN Port Connects to your router. USB Ports Connect to compatible USB devices, such as the DHM-101 Z-Wave USB Dongle. Learn/Reset Button Turns on pairing mode. Power Connector Connects to the included power adapter.
Product Overview Hardware Overview: Keypad LEDs - Active/Operation - Status - Alarm/Error Status Button Armed Home Button Armed Away Button Help Button Clear Events Button D-Link DHM-901T User Manual 9
Product Overview Hardware Overview: Contact Sensor Pairing Button and LED Contact Sensor Piece D-Link DHM-901T User Manual 10
Product Overview Hardware Overview: Motion Sensor Pairing Button and LED D-Link DHM-901T User Manual 11
Product Overview Hardware Installation: Gateway Inserting batteries into your DHM-401T Gateway (optional) Remove the battery cover and insert 6 AAA batteries (not included) as indicated. Replace the battery cover. Connect the DHM-401T Gateway Connect one end of the included Ethernet cable to an available LAN port on your router, and connect the other end to the WAN port on the DHM-401T. Connect the power adapter to the DHM-401T.
Product Overview Hardware Installation: Keypad Inserting batteries into your DHM-301T Keypad Slide and remove the battery cover on the back of the keypad, then insert 2 AAA batteries as indicated. Replace the battery cover. Pairing the DHM-301T Keypad Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED flashes green. You now have 60 seconds to pair sensors to the gateway.
Product Overview Hardware Installation: Contact Sensor Inserting batteries into your DHM-303T Contact Sensor Use a coin to open the case, then lift the top cover off of the contact sensor. Insert the CR123A 3V battery as indicated. Replace the top cover of the contact sensor and make sure the two halves snap together. Pairing the DHM-303T Contact Sensor Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED flashes green.
Product Overview Hardware Installation: Motion Sensor Inserting batteries into your DHM-304T Motion Sensor Slide and remove the battery cover on the top of the Motion Sensor, then insert 2 AAA batteries as indicated. Replace the battery cover. Pairing the DHM-304T Motion Sensor Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED flashes green. You now have 60 seconds to pair sensors to the gateway.
Appendix A - Technical Specifications Technical Specifications Frequency 315 MHz Operating Temperature -10 to 50 °C (14 to 122 °F), Indoor use Humidity 5% - 95% RH non-condensing DHM-401T Gateway Transmission Range: Minimum 70 meters in open air Audio: 1 x Buzzer, 1 x Siren Siren Volume: 85 db USB: 2 x USB 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
