User's Manual

16D-Link DHP-1565 User Manual
Section 1 - Product Overview
Note: A minimum of two PowerLine AV devices are required to create a network in order for your product to work properly.
Step 1
Plug the other PowerLine AV devices in the same room to verify if your home’s electrical wiring is suitable for the PowerLine Network. Once
congured you may place your PowerLine AV devices in the location of your choice. Plug one end of the Ethernet cable into the Ethernet port on
the PowerLine AV device.
Step 2
Press the Simple Connect Button
located on the back panel of the DHP-1565 for 2 seconds. The Power LED will start blinking after you release
the button. Within 2 minutes of pushing the Simple Connect Button on the DHP-1565, press the Simple Connect Button on the second
PowerLine AV device(s) in your existing PowerLine network for 2 seconds. The Power LED will start blinking after you release the button. Network
Connectivity is conrmed when the PowerLine AV LEDs indicators on the DHP-1565 and PowerLine AV device are illuminated.
Step 3
After the network security setup steps, your PowerLine network will be securely congured with the same network encryption key. Place any
additional PowerLine AV devices in a dierent area of your home. The PowerLine AV devices will save the security settings even if they are unplugged.
Step 4
If your network has more than two PowerLine AV devices, press the Simple Connect Button on the DHP-1565 for 2 seconds. Within 2 minutes
of pushing the Simple Connect Button on the DHP-1565, press the Simple Connect Button on any additional PowerLine AV devices in your existing
PowerLine network for 2 seconds.
Network Connectivity is conrmed when the PowerLine AV LEDs indicators on the DHP-1565 and PowerLine AV device are illuminated. After
the network security setup steps, you can place any additional PowerLine AV devices in a dierent area of your home. The PowerLine AV devices
will save the security settings even if they are unplugged.
PowerLine Network Device Setup