User's Manual

84D-Link DHP-1565 User Manual
Section 3 - Conguration
Time
Select the Time Zone from the drop-down menu.
Check this box if the country your are located in uses
Daylight Saving time. Enter a start date and an end date
for daylight saving time.
Check this box to enable the NTP Server.
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers. To enable
NTP carry out the following:
1.
Check the Automatically synchronize with D-Link’s
Internet Time Server box.
2.
Choose the D-Link NTP server that you would like to
synchronize with from the NTP Server Used drop-down
menu.
Use this section to configure the time manually. To
congure the time manually, use the drop-down menus
to select the appropriate Year, Month, Day, Hour, Minute,
and Second.
Time Zone:
Enable
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Set the Time
and Date
Manually:
The Time window allows you to congure, update, and maintain the correct time on the internal system clock. From this section you can set the
time zone that you are in and set the Time Server. Daylight Saving can also be congured to automatically adjust the time when needed.
Click the Save Settings button to save any changes made.