User Manual

23D-Link DHP-W220AV User Manual
Section 3 - Conguration
Time
The Time and Date options allow you to congure, update, and maintain the correct time on the internal system clock. From
this section you can set the time zone that you are in. Daylight saving and NTP can also be congured to automatically adjust
the time when needed.
Time Zone:
Enable Daylight
Saving:
Enable NTP:
NTP Server Used:
Set Date and Time
Manually:
Select the Time Zone from the drop-down menu.
To enable daylight saving time adjustment, click the
Enable Daylight Saving check box. Next, use the drop-
down menu to select a Daylight Saving Oset and then
enter a start date and an end date for daylight saving
time.
NTP (Network Time Protocol) allows the device to
automatically set the system clock based on an Internet
NTP server. Check this box to use a NTP server. This will
only connect to a server on the Internet, not a local
server.
Enter the NTP server or select one from the
drop-down menu.
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings. You can also click
the Copy Your Computer’s Time Settings button at the
bottom of the screen.
Click Save Settings to save and activate the
new changes.