- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
57
Recording Options
IPView Lite- Getting Started (continued)
Camera Property Settings > Recording
Manual Recording
If the Manual Recording option is chosen, you must manually start recording in the
List view of the DCS-900 in the Menu Bar or by clicking on the Record Icon. Choose
Round the Clock to enable the DCS-900 to record all video frames continuously to
your hard drive. Larger files will be generated if Round-the-Clock Manual Recording is
chosen. The Motion-Based Recording option uses movements to record only relevant
video frames and will generate much smaller files to save your hard disk drive space.
Click on Sensitivity Setting to set the sensitivity levels for the DCS-900.