User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Quick Router Setup Wizard (CD)
- Quick Setup Wizard
- Web-based Configuration Utility
- Manual Internet Setup
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Configure WPA Enterprise
- Advanced
- Maintance
- Status
- Quick Setup Wizard
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Advanced
- Wi-Fi Protected Setup
- Maintenance
- Status
- Quick Setup Wizard
- Setup
- Configure WPA/WPA2 Personal
- Advanced
- Maintance
- Status
- Help
- Connect a Wireless Client to your Router
- Troubleshooting
- Wireless Basics
- Networking Basics
- Contacting Technical Support
- GPL Code Statement
- Warranty
- Registration
95D-Link DIR-505 User Manual
Section 3 - Conguration
Manual Wireless Settings
Extended SSID:
Channel Width:
Security Mode:
WPA Mode:
Cipher Type:
Pre-Shared Key:
Select Remain the same as SSID or Create Extended
SSID.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if you are using 802.11n wireless clients
only.
Select from the drop-down menu the type of security
mode you would like to use.
Select Auto, WPA2 Only, or WPA Only. Use Auto if you
have wireless clients using both WPA and WPA2.
Select TKIP and AES, TKIP, or AES.
Enter a key (passphrase). The key is entered as a passphrase
in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.