User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Quick Router Setup Wizard (CD)
- Quick Setup Wizard
- Web-based Configuration Utility
- Manual Internet Setup
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Configure WPA Enterprise
- Advanced
- Maintance
- Status
- Quick Setup Wizard
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Advanced
- Wi-Fi Protected Setup
- Maintenance
- Status
- Quick Setup Wizard
- Setup
- Configure WPA/WPA2 Personal
- Advanced
- Maintance
- Status
- Help
- Connect a Wireless Client to your Router
- Troubleshooting
- Wireless Basics
- Networking Basics
- Contacting Technical Support
- GPL Code Statement
- Warranty
- Registration
12D-Link DIR-505 User Manual
Section 2 - Installation
1. Turn o and unplug your cable or DSL broadband modem. This is required.
Manual Setup
Important: for best results, insert the Installation CD and follow the on-screen instructions. If you are unable to use the CD or
are using Mac or Linux, please use the following installation steps:
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the blue port labeled 1 on the back of your router. The router is now connected to your computer.