User's Manual

38D-Link DIR-505 User Manual
Section 4 - Security
Congure WPA Enterprise
It is recommended to enable encryption on your wireless access
point before your wireless network adapters. Please establish wireless
connectivity before enabling encryption. Your wireless signal may
degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode select Auto (WPA or WPA2).
4. Next to Cipher Mode, select TKIP, AES, or Auto.
5. Next to RADIUS Server, enter the IP Address of your RADIUS server.
6. Next to RADIUS Server Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Save Settings to save your settings.