User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Quick Router Setup Wizard (CD)
- Quick Setup Wizard
- Web-based Configuration Utility
- Manual Internet Setup
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Configure WPA Enterprise
- Advanced
- Maintance
- Status
- Quick Setup Wizard
- Manual Configuration
- Wireless Security
- Configure WEP
- Configure WPA/WPA2 Personal
- Advanced
- Wi-Fi Protected Setup
- Maintenance
- Status
- Quick Setup Wizard
- Setup
- Configure WPA/WPA2 Personal
- Advanced
- Maintance
- Status
- Help
- Connect a Wireless Client to your Router
- Troubleshooting
- Wireless Basics
- Networking Basics
- Contacting Technical Support
- GPL Code Statement
- Warranty
- Registration
39D-Link DIR-505 User Manual
Section 3 - Conguration
This section will allow you to change the local network settings of the router and to congure the DHCP settings.
Network Settings
Enter the IP address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the conguration utility.
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enter a name for the router.
Enter the Domain name (Optional).
Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
Router IP
Address:
Subnet Mask:
Device Name:
Local Domain:
Enable DNS
Relay:
Router Settings