User's Manual

71D-Link DIR-505 User Manual
Section 3 - Conguration
Repeater Mode
Enable Wireless:
Wireless Mode:
Wireless
Network Name:
Channel Width:
Security Mode:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. You may also set up a specic time
range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule.
Select Repeater Mode from the drop-down menu.
When you are browsing for available wireless networks,
this is the name that will appear in the list (unless Visibility
Status is set to Invisible, see below). This name is also
referred to as the SSID. For security purposes, it is highly
recommended to change from the default network name.
Select the appropriate channel width between 20MHz or
Auto 20/40MHz from the drop-down menu.
Select WEP or WPA Personal.