User's Manual

75D-Link DIR-505 User Manual
Section 3 - Conguration
This section will allow you to change the local network settings of the access point and to congure the DHCP settings.
Device Name:
LAN Connection
Type:
My IPv6
Connection Type:
IP Address:
Subnet Mask:
Gateway
Address:
Enter the Device Name of the AP. It is recommended to
change the Device Name if there is more than one D-Link
device within the subnet.
Use the drop-down menu to select Dynamic IP (DHCP)
to automatically obtain an IP address on the LAN/private
network.
Select from the drop-down menu the type of IPv6
connection you would like to use.
Enter the IP address of the access point. The default IP
address is 192.168.0.50. If you change the IP address, once
you click Apply, you will need to enter the new IP address
in your browser to get back into the conguration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
LAN Settings