User's Manual

76D-Link DIR-505 User Manual
Section 3 - Conguration
Device Name:
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It recommended to
change the Device Name if there is more than one D-Link
device within the subnet. You can enter the device name
of the AP into your web browser to access the instead of
IP address for conguration. If you are using the device
name to connect, ensure that your PC and your DIR-505
are on the same network.
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The default IP
address is 192.168.0.50. If you change the IP address, once
you click Apply, you will need to enter the new IP address
in your browser to get back into the conguration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access point will not accept the IP
address if it is not in this format.