User's Manual

90D-Link DIR-505 User Manual
Section 3 - Conguration
Setup
Wi-Fi Hot Spot Setup
Enable Wireless:
Wireless Mode:
Wireless
Network Name:
Channel Width:
Security Mode:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. You may also set up a specic time
range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule.
Select Wi-Fi Hot Spot Mode from the drop-down menu.
When you are browsing for available wireless networks,
this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID. For security purposes,
it is highly recommended to change from the default
network name.
Select the appropriate channel width between 20MHz
or Auto 20/40MHz from the drop-down menu.
Select WEP or WPA Personal.