User's Manual

30D-Link DIR-601 User Manual
Section 3 - Conguration
Manual Wireless Network Setup
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Click Add New to create your own
time schedule to enable the wireless function.
Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Select one of the following:
802.11gOnly - Select if all of your wireless clients are
802.11g.
802.11nOnly - Select only if all of your wireless clients
are 802.11n.
Mixed802.11nand802.11g - Select if you are using
a mix of 802.11n and 802.11g wireless clients.
The AutoChannelScan setting can be selected to allow
the DIR-601 to choose the channel with the least amount
of interference.
Indicates the channel setting for the DIR-601. By default
the channel is set to 6. The Channel can be changed to
t the channel setting for an existing wireless network
or to customize the wireless network. If you enable Auto
ChannelScan, this option will be greyed out.
Select the Channel Width:
Auto20/40 - Select if you are using both
802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients. This is the default setting.
40MHz - Select if you are using only 802.11n wireless
clients.
Enable
Wireless:
Wireless
Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Channel
Width: