User's Manual

14D-Link DIR-610 User Manual
Section 3 - Software Conguration
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following
page will appear:
Address Mode: The user can specify whether this Internet
connection requires the use of a Dynamic or Static
IP address. PPPoE usually requires a Dynamic IP
conguration.
IP Address: Enter the PPPoE IP address used. This option is
only available if Static IP is selected.
User Name: Enter the PPPoE account user name used. This
information is given by the ISP.
Password: Enter the PPPoE account password used. This
information is given by the ISP.
Verify Password: Re-enter the PPPoE account password used.
Service Name: This optional eld enables the user to enter a
service name to identify this Internet connection.
Primary DNS
Address:
Enter the Primary DNS IP address used.
Click Next to continue.