User's Manual

15D-Link DIR-610 User Manual
Section 3 - Software Conguration
Step 3: Internet Connection (PPTP)
After selecting the PPTP Internet connection method, the following page
will appear:
Address Mode: Here the user can specify whether this Internet
connection requires the use of a Dynamic or Static
IP address. PPTP usually requires a Dynamic IP
conguration.
PPTP IP Address: Enter the PPTP IP address used here. This option is
only available if Static IP is selected.
PPTP Subnet
Mask:
Enter the PPTP Subnet Mask used.
PPTP Gateway IP
Address:
Enter the PPTP Gateway IP address used.
PPTP Server IP
Address:
Enter the PPTP Server IP address used. This is
normally the same as the PPTP Gateway IP address.
User Name: Enter the PPTP username used.
Password: Enter the PPTP password used.
Verify Password: Re-enter the PPTP password used.
Primary DNS
Address:
Enter the Primary DNS IP address used.
Secondary DNS
Address:
Enter the Secondary DNS IP address used. This eld is normally optional. Only one DNS address is required for a functional
Internet connection, but using a second DNS address provides more stability.
Click Next to continue.