User's Manual

16D-Link DIR-610 User Manual
Section 3 - Software Conguration
Step 3: Internet Connection (L2TP)
After selecting the L2TP Internet connection method, the following
page will appear:
Address Mode: Here the user can specify whether this Internet
connection requires the use of a Dynamic or Static
IP address. L2TP usually requires a Dynamic IP
conguration.
L2TP IP Address: Enter the L2TP IP address used here. This option is
only available if Static IP is selected.
L2TP Subnet
Mask:
Enter the L2TP Subnet Mask used.
L2TP Gateway IP
Address:
Enter the L2TP Gateway IP address used.
L2TP Server IP
Address:
Enter the L2TP Server IP address used. This is
normally the same as the L2TP Gateway IP address.
User Name: Enter the L2TP username used.
Password: Enter the L2TP password used.
Verify Password: Re-enter the L2TP password used.
Primary DNS
Address:
Enter the Primary DNS IP address used.
Secondary DNS
Address:
Enter the Secondary DNS IP address used. This eld is normally optional. Only one DNS address is required for a functional
Internet connection, but using a second DNS address provides more stability.
Click Next to continue.