User's Manual

18D-Link DIR-610 User Manual
Section 3 - Software Conguration
Manual Conguration
At any given point the user can save the conguration done by clicking
on the Save Settings button. If you choose to discard the changes
made, click on the Don’t Save Settings.
Internet Connection Type
In this section, the user can select from a list of Internet Connection
types that can be congured and used on this router. Options to choose
from are Static IP, Dynamic IP, PPPoE, PPTP, L2TP, and DS-Lite.
After selecting a specic Internet Connection type, this page will
automatically refresh and display unique elds to congure related to
the specied Internet Connection type.
My Internet Connection is: Dynamic IP (DHCP)
The default WAN conguration for this router is Dynamic IP (DHCP). This
option allows the router to obtain an IP address automatically from the
device that is connected to the Internet port.
Note: If you’re not sure about the type of Internet Connection you have,
please contact your Internet Service Provider (ISP) for assistance.
Host Name: The Host Name is optional but may be required by
some ISPs. Leave it blank if you are not sure.
Use Unicasting: Tick this option if your ISP uses the unicast method
to provide IP addresses.
Primary DNS: Enter the Primary DNS IP address used.
On this page the user can congure the Internet Connection settings
manually. To access the Manual Internet Connection Setup page, click
on the Manual Internet Connection Setup button. On this page there
are multiple parameters that can be congured regarding the Internet
Connection setup. We’ll discuss them from top to bottom.