User's Manual
19D-Link DIR-610 User Manual
Section 3 - Software Conguration
Secondary DNS: Enter the Secondary DNS IP address used. This eld is normally optional. Only one DNS address is required for a functional
Internet connection, but using a second DNS address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the
default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC
Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
My Internet Connection is: Static IP
Another Internet Connection type is Static IP. This option allows the user
to manually congure the Static IP Internet Connection type. Normally
the information entered will be supplied by your ISP.
IP Address: Enter the Static IP address provided by the ISP.
Subnet Mask: Enter the Subnet Mask provided by the ISP.
Default
Gateway:
Enter the Gateway IP address provided by the ISP.
Primary DNS: Enter the Primary DNS IP address used.
Secondary DNS: Enter the Secondary DNS IP address used. This
eld is normally optional. Only one DNS address
is required for a functional Internet connection,
but using a second DNS address provides more
stability.
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specic ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC
Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.