User's Manual

20D-Link DIR-610 User Manual
Section 3 - Software Conguration
My Internet Connection is: PPPoE (Username/Password)
Another Internet Connection type is PPPoE. This option is typically used if you have a DSL Internet Connection. Make sure to remove the PPPoE
software installed on your computer rst before using this connection type. Most of the information needed for this connection type is provided
to you by your ISP.
Address Mode: Here you can specify whether the Internet
connection requires the use of a Dynamic or Static
IP address. PPPoE usually requires a Dynamic IP
conguration.
IP Address: Enter the PPPoE IP address used here. This option
is only available if Static IP is selected.
Username: Enter the PPPoE account user name used. This
information is given by the ISP.
Password: Enter the PPPoE account password used. This
information is given by the ISP.
Verify Password: Re-enter the PPPoE account password used.
Service Name: This optional eld enables the user to enter a
service name to identify this Internet connection.
Reconnect
Mode:
Use the radio buttons to specify the reconnect
mode. The user can specify a custom schedule
or specify the On Demand, or Manual option. To
specify a custom schedule, use the drop-down
menu to select one of the schedules that has been
dened in the Schedules page. To create a new
schedule, click the New Schedule button to open
the Schedules page. Schedules will be discussed
later.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity.
DNS Mode: This option allow the router to obtain the DNS IP addresses from the ISP, when Receive DNS from ISP is selected, or allows the
user to enter the DNS IP address manually, when Enter DNS Manually is selected.
Primary DNS
Server:
Enter the Primary DNS IP address used here.