User's Manual
45D-Link DIR-610 User Manual
Section 3 - Software Conguration
Manual IPv6 Internet Connection Option
For the advanced user that have congured a router before, click on
the Manual IPv6 Internet Connection Setup button to input all the
settings manually.
On this page the user can manually congure the mode that the
Router will use to access an IPv6 Internet connection. There are several
connection types to choose from: Link-local, Static IPv6, DHCPv6,
Stateless Auto-Conguration, PPPoE, IPv6 over IPv4 Tunnel and 6to4.
If you are unsure of your connection method, please contact your IPv6
ISP.
IPv6 Connection Type: Auto Detection
In the following section we’ll discuss the parameters that can be
congured when setting up an Auto Detection (Stateless/DHCPv6)
connection. This is a method of connection where the ISP assigns your
IPv6 address when your router requests one from the ISP’s server. Some
ISP’s require you to make some settings on your side before your router
can connect to the IPv6 Internet.
Obtain IPv6
DNS Server
automatically:
Select this option to obtain the DNS Server
addresses automatically.
Use the
following IPv6
DNS Servers:
Select this option to manually enter the DNS
Server addresses used.
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS: Enter the secondary DNS Server address used
here.