User's Manual

46D-Link DIR-610 User Manual
Section 3 - Software Conguration
Use the section to congure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access
the Web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network settings to access the
network again. DHCP-PD can be used to acquire a IPv6 prex for the LAN interface.
Enable DHCP-
PD:
Select this option to enable DHCP PD.
LAN IPv6
Address:
Enter the LAN IPv6 address used here. This address
must be in the ‘/64’ subnet.
LAN IPv6 Link-
Local Address:
Displays the LAN IPv6 Link-Local address used
here.
The following parameters will be available for conguration:
Enable Automatic
IPv6 address:
The user can tick this option to enable the auto-
conguration feature.
Enable Automatic
DHCP-PD in LAN:
Autoconguration
Tick this option to enable the automatic DHCP-PD
on the LAN.
Autoconguration
Type:
The user can select the auto-conguration type
used here.
Router
Advertisement
Lifetime:
This option is only available when the auto-
conguration type is set to Stateless. Enter the
router advertisement lifetime value used here.