User's Manual

54D-Link DIR-610 User Manual
Section 3 - Software Conguration
The following parameters will be available for conguration:
Enable Automatic
IPv6 address:
The user can tick this option to enable the
auto-conguration feature.
Enable Automatic
DHCP-PD in LAN:
Tick this option to enable the automatic DHCP-
PD on the LAN.
Autoconguration
Type:
The user can select the auto-conguration
type used here.
Router
Advertisement
Lifetime:
This option is only available when the auto-
conguration type is set to Stateless. Enter the
router advertisement lifetime value used here.
IPv6 Address Range
(Start):
This option is only available when the auto-
conguration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address Range
(End):
This option is only available when the auto-
conguration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address
Lifetime:
This option is only available when the auto-
conguration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.