User's Manual

90D-Link DIR-610 User Manual
Section 3 - Software Conguration
System
This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for conguration:
Save Settings To
Local Hard Drive:
Use this option to save the current router
conguration settings to a le on the hard disk of
the computer you are using. First, click the Save
button. A le dialog will appear, allowing you to
select a location and le name for the settings.
Load Settings
From Local Hard
Drive:
Use this option to load previously saved router
conguration settings. First, use the Browse option
to nd a previously saved le of conguration
settings. Then, click the Restore Conguration
From File button below to transfer those settings
to the router.
Restore To
Factory Default
Settings:
This option will restore all conguration settings
back to the settings that were in eect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, use the Save button above.
Reboot The
Device:
Click to reboot the router.
Clear Language
Pack:
If you previously installed a language pack and want to revert all the menus on the Router interface back to the default
language settings, click the Clear button.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.