User's Manual

35D-Link DIR-615 User Manual
Section 4 - Conguration
PPPoE (cont)
Service name: Specify the ISP service name (optional).
Authentication
protocol:
Choose from AUTO, PAP, CHAP, MS-CHAP, or MS-CHAPv2. AUTO
is selected by default.
Keep alive: Toggle this switch to maintain your connection when no activity is
detected.
LCP interval: If you have enabled Keep alive, specify the LCP Echo frequency in
seconds. The default setting is 30.
LCP fails: If you have enabled Keep alive, specify the maximum number of LCP
fails before the connection is dropped.
Dial on demand: Enable this option to automatically dial a PPPoE connection when
data ow is detected.
Maximum idle
time:
If you have enabled Dial on demand, specify a maximum idle time
in seconds before the connection will be dropped.
Static IP address: Specify the IP address provided by your ISP.
PPP IP extension: Toggle this switch to enable the PPP server to directly assign IP
addresses to PCs behind your router. This is disabled by default.
PPP debug: Toggle this switch to enable PPP debug. This feature is disabled by
default.
Ethernet
MAC address: The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can edit that address manually here.