User's Manual
60D-Link DIR-615 User Manual
Section 4 - Conguration
From this page you can congure your wireless network settings. There
are two tabs for 2.4 GHz and 5 GHz. 802.11n/g/b operate on 2.4 GHz, while
802.11ac/n/a operates over 5 GHz. 2.4 GHz and 5 GHz networks are congured
independently.
Wireless network
General Settings
Enable Wireless: Toggle this switch to enable wireless access.
Wireless mode: Select a wireless mode from the list.
Select channel
automatically:
Toggle this switch to enable to allow the router to automatically select
an operating channel.
Enable additional
channels:
Toggle this switch to enable higher channels on the 5 GHz band.
Note: This feature is only supported over 5 GHz.
Channel: If Select channel automatically is disabled, select the channel your
router will use.
Enable periodic
scanning:
Toggle this switch to periodically scan for an optimal channel.
Scanning period: If Enable periodic scanning is enabled, specify the amount of time
in seconds between scans.
Wi-Fi Network
Network name
(SSID):
Specify the desire SSID for your wireless network. All devices must
connect to this SSID.
Hide SSID: Toggle this switch to prevent SSID broadcasting. Clients will still need
to enter the correct SSID to connect to your network.