User's Manual Part 2

82D-Link DIR-652 User Manual
Section 4 - Security
#ONlGURE70!0ERSONAL03+
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
Log into the web-based configuration by opening a web browser and entering the IP address of the router
(192.168.0.1).
Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on3ETUPand then click Wireless Settings
on the left side.
2. Next to Security Mode, select 70!0ERSONAL.
3. Next to WPA Mode, select Auto, 70!/NLY, or WPA Only.
Use Auto if you have wireless clients using both WPA and
WPA2.
4. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data
is changed (3600 is default).
5. Next to Pre-Shared Key, enter a key (passphrase). The key
is entered as a pass-phrase in ASCII format at both ends of
the wireless connection. The pass-phrase must be between
8-63 characters.
6. Click Save SettingsVQUCXG[QWTUGVVKPIU+H[QWCTGEQPſIWTKPIVJGTQWVGTYKVJCYKTGNGUUCFCRVGT[QWYKNNNQUG
EQPPGEVKXKV[WPVKN[QWGPCDNG92#25-QP[QWTCFCRVGTCPFGPVGTVJGUCOGRCUURJTCUGCU[QWFKFQPVJGTQWVGT