User's Manual Part 2
83D-Link DIR-652 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
.QIKPVQVJGYGDDCUGFEQPſIWTCVKQPD[QRGPKPICYGDDTQYUGTCPFGPVGTKPIVJG+2CFFTGUUQHVJGTQWVGT
Click on3ETUPand then click Wireless Settings on the left side.
2. Next to Security Mode, select 70!%NTERPRISE.
3. Next to WPA Mode, select Auto, 70!/NLY, or WPA Only. Use Auto
if you have wireless clients using both WPA and WPA2.
4. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
5. Next to Authentication Timeout, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
6. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
7. Next to RADIUS Server Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
8. Next to RADIUS Server Shared Secret, enter the security key.
9. If the MAC Address Authentication box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
10. Click Advanced to enter settings for a secondary RADIUS
Server.
11. Click !PPLY3ETTINGS to save your settings.
#ONlGURE70!%NTERPRISE2!$)53